With the »pomBasic« and the »pomBasicMicro« we are able to select the right camera for each tool area, the devices differ only in the camera technology.

Thanks to the individual personalization of the user interface (layout), operation is very simple, fast and efficient.

Yes, both camera variants have a digital zoom function.

Yes, there are various measurement functions for wear measurements. These measurements can be made in the µm range and the logs can be created in the tool view and as a result.

Yes, with the digital background function, visual inspection is possible very quickly for all operators.

Yes, thanks to the camera's macro function, the measurement sequence is recorded once and can be called up as often as required for repeat measurements.

Yes, all tools can be compared with the nominal/actual contour using the DXF function and the deviations are output in the inspection report.

There is an automatic illumination setting for incident light before each measurement. In addition, the illumination setting for incident light and transmitted light can be saved individually in the respective tool ID and called up again.

Ideally, the diameter range for the »pomBasic« starts from 0.118" (3 mm) and for the »pomBasicMicro«, the diameter range starts from 0.008" (0.2 mm) increasing.

Yes, the axis travel paths of the axes for X and Y are the same for both device variants, so larger diameters can also be measured with the »pomBasicMicro«.

A large number of tool holders are available for a wide range of tool areas.

ZOLLER is continuously expanding the measuring functions of the »pomSoft« software for process-oriented measuring. Customer-specific solutions can be integrated into these measuring functions.

Yes, there are individual options within the scope of ISO certification, for full-service maintenance, standard quality control, quality control and maintenance.